| | |  | Oils & Fluids | Home » » » J-B Weld 8265-S Cold Weld | | | | | | | Description: | | J-B Weld is a remarkably easy, convenient and inexpensive alternative to welding, soldering and brazing. J-B Weld will bond to virtually any clean, dry surface including: iron, steel, copper, aluminum, brass, bronze, pewter, porcelain, ceramic, marble, glass, concrete, fiberglass, wood, some plastics, and many more. Before it sets, you can clean up with soap and water. | | | Features: | |
• Will set in 4-6 hours, and cure in 16-24 hours
• J-B Weld is waterproof; petroleum, chemical, and acid resistant when fully cured
• Can be drilled, tapped, machined, filed, sanded and painted
• J-B Weld is superstrong, nontoxic after it has set and temperature resistant up to 500F
• Tensile strength is 3,960 PSI
| | | Product Details: | | | Product Length:
| 0.8 inches | | Product Width:
| 4.9 inches | | Product Height:
| 7.9 inches | | Product Weight:
| 0.2 pounds | | Package Length:
| 7.8 inches | | Package Width:
| 5.0 inches | | Package Height:
| 0.5 inches | | Package Weight:
| 0.05 pounds | | Average Customer Rating:
|  based on 46 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
 ( 46 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
72 of 72 found the following review helpful:
 apply it correctlyNov 10, 2009
By Vivaldi Guy
and this is great stuff. some pointers
Epoxy glues have a limited shelf life. Buy yours at a small store where the merchandise doesn't move quickly, or keep it 5 years on the shelf and it won't work well. Don't apply it at temperatures below 60 degrees. Spend at least 2 or 3 minutes mixing it. I use a timer to be sure. Surface preparation is the key. It must be completely grease free. I use naptha (lighter fluid) alcohol, and acetone in that order. The surface MUST be rough. I use a file,very rough (#40 or #60) sandpaper or a sharp Exacto blade to make multiple cross hatch cuts- this will even work on most steels. Apply the mix carefully, put the pieces together so they don't move for at least 8 hours.
Do all that and the bond is very strong.
15 of 15 found the following review helpful:
couldn't live without itApr 08, 2011
By John A. Lucier
I think little elaboration is necessary after seeing other good reviews.
I have used this stuff over 20 years, probably gone through a half dozen of the industrial size packs. Saved many things from the dumpster by fixing them instead. Love the water cleanup and non toxic thing, I usually end up wearing stuff like liquid nails and PL construction adhesive which removes skin, I can be a big happy mess with JB weld and wash it right off me and my tools. In short, no credible home handyman OR professional should be without this around.
Like another user I fixed a radiator with it, a neighbor's nissan 240sx. He rear ended some guy and broke the top, about a 3" long fissure along the base of the fill spout (the plastic part) 2 years later when he moved to ohio and drove it the 1500 miles there it still hadn't leaked a drop.
I remember the packages in the old days used to have these outrageous testimonials like "I fixed the axle of my 10 ton farm tractor" and at first I'm all "get outta here, how is that possible?" but with proper prep,(roughing up to give it something to latch onto) cleaning, thorough and accurate mixture (if you err it's probably better to be light in the hardener not heavy) and good long cure time (I give it twice the max if possible and never play with it while it's drying) I don't think those claims were at all absurd any more.
If you don't have JB weld you aren't fixing things as good as those of us that do. Can I say that?
Fun tip: if JB weld is running away from where you want it to be in warm weather after applying, you can use a strong (like rare earth) magnet to draw it back toward where you like. Or take your magnet and hold it under a piece of aluminum plate and move it around just for giggles. It's steel!
11 of 11 found the following review helpful:
Handy Hubbies Love ItFeb 12, 2009
By Karen Emmons
I gave this to my husband, Timothy, for Christmas (among other things). Yes, call me strange and I'll answer. He thought it was an odd gift, but he thanked me later when inevitable occasions to use it came up! He used it on our aluminum hull boat and on his fishing poles. Recently we had a contractor working at our house. When his air compressor cracked, he asked my hubby if he had any J-B Weld. "Well,yes, I do!" was my husband's answer. J-B Weld saved the day!
9 of 9 found the following review helpful:
AwesomeOct 06, 2008
By WJB
I used JB Weld on my car's side mirror since it broke off, and that mirror is rock solid now. I barely used any as well and have a lot left. I wish I would have known about this before trying to use Gorilla tape (which wore off and left white residue on my mirror...maroon car), because it would never have even been noticeable that my side mirror broke. Why go to an autoshop and spend over $100 when you can get this stuff for less than $7. The fix itself considering how much of the product I used probably amounts to 50 cents. Now that's a steal in my opinion.
12 of 13 found the following review helpful:
Recommended by old Mr. FixitNov 04, 2008
By David Lee
Six months ago, an incompetent metal thief almost cut through the pipe leading to the cat converter on my truck. The cut was big enough to release smelly fumes and make an annoying sound. So, I headed to Home Depot, looking for a cheap patch.
An older employee recommended J-B Weld. I bought some copper wire and some J-B- Weld. I covered the cut with a few wraps of the wire, and then sealed it with J-B Weld. That did the trick.
See all 46 customer reviews on Amazon.com
| | |
|
Check Out 
